MATERIAL SAFETY DATA SHEET
Section 1: Product Identification
Supplier’s Name: Austin Davis Industries, Inc. Date: February 25, 2012 Tel: (847) 918-7412 | Fax: (847) 949-4470
Trade Name: Bio-Blend 3000TM Chemical Family: Solvent blend HMIS/NFPA: Health: 0 Fire: 2 Reactivity: 0 PPI: B
Section 2: Hazardous Ingredients
4-isopropenyl-1-methyl cyclohexane (CAS) 5-989-27-5) Dimethyl colutarate (CAS 1119-40-0)
Dimethyl adipate (CAS 627-93-0)
Dimethyl succinate (CAS 106-65-0)
Primary alcohol alkoxylate (CAS 68603-25-8)
Section 3: Physical Data
% TLV (PPM) 40 NA
10-20 NA 10-20 NA
Boiling Range Deg. C: 198-218.5
Vapor Pressure (MMH9at20Deg C): 45.67 Vapor Density (Air=1): 272.4
Solubility in Water: Miscible
Flash Point: 80 degrees C
Specific Gravity (H2O=1): 0.978 Percent V olatile by V olume (%): 100 Evaporation Rate (B.A.=1): <1 Appearance and Odor: Clear Liquid pH: 7
Section 4: Fire and Explosion Data
Extinguishing Media: Carbon Dioxide or Dry Chemical.
Special Fire Fighting Procedures: Keep personnel upwind of fire. Wear self-contained breathing apparatus.
Cool tank with water spray.
Unusual Fire and Explosion Hazards: Vapor may form explosive mixture with air. In the flammable range,
A spark may ignite vapors.
Section 5: Health Hazard Data
Effects of Over Exposure: Acute: Contact may cause skin irritation or marked discomfort in the eye. Breathing vapors may cause irritation of upper respiratory tract.
Emergency and First Aid Procedures: Eyes: Gently blot excess chemical and wash with lukewarm water for 20 minutes. Skin: Remove contaminated clothing. Wash with water and non-abrasive soap. Ingestion: Do not induce vomiting. Contact physician.
Section 6: Reactivity Data
Stability: Stable Hazardous Polymerization: Will not occur.
Incompatibility (Materials to Avoid): Strong Oxidants, Acids, and Alkalis.
Hazardous Decomposition Products: Burning may produce carbon monoxide and/or carbon dioxide. Conditions to Avoid: Extreme Heat.
MATERIAL SAFETY DATA SHEET Bio-Blend 3000
Section 7: Spill or Leak Procedures
Steps to be Taken in Case Material is Released or Spilled: Contain spill by soaking with absorbent material. Flush area with lots of water.
Waste Disposal Method: Dispose in accordance with local and municipal regulations.
Section 8: Special Protection Information
Respiration Protection: NOSH approved respirator needed in circumstances where a great deal of mist and Vapors are generated.
Ventilation: General room ventilation is expected to be adequate.
Protective Gloves: Wear gloves to prevent prolonged contact.
Eye Protection: Protective goggles are recommended to prevent eye contact. Other Protective Equipment: None needed.
Section 9: Special Precautions
Precautions to be Taken in Handling and Storage: Store in a cool dry place away from incompatible materials.
The information contained herein is based upon data provided to us by our suppliers, and reflects our best judgment. However, Austin Davis Industries, Inc. makes no warranty of merchantability, fitness for use, or any other warranty is expressed or implied regarding the accuracy of such data, or the results to be obtained from the use thereof. Since the information contained herein may be applied under conditions beyond our control and with which we may be unfamiliar, we do not assume any responsibility for the results of such application. This information is furnished upon the condition that the persons receiving it shall make their own determination of the suitability of the material for any particular purpose.
Austin Davis Industries, Inc., P.O. Box 6448, Libertyville, Illinois USA Tel: (847) 918-7412